The materials we use in the production of torque arm are generally made of 45 or 40Cr steel. According to the drawings provided by customers, through a series of processes such as forging, tempering, lathe machining, hobbing, drilling, quenching, flaw detection, high-temperature tempering, testing and packaging, the torque arm products that meet the needs of customers are created.
Contact Now
Torque arm in wind power refers to an important structural part of wind turbine, which is used to convert wind energy into electric energy. The rotor of wind turbine usually includes impeller (blade), shaft and torque arm.
Contact Now
Our Baohua company is able to independently design and develop the die, which makes the torque arm forge in one shape, saves material greatly and improves the stability of the product. Moreover, Baohua has the finishing ability, which can cover many processes such as forging, machining, heat treatment, finishing and so on. Finally, the finished product can be delivered. And we can deliver according to customer needs in different delivery states. The torque arm is a suspension component mounted on the rear drive axle of rear wheel drive vehicles.
Contact Now
The torque arm on wind power refers to the part between the main shaft of the wind turbine and the rotor of the generator, which converts the torque transmitted by the rotating main shaft into the power that the generator drives the rotor to rotate, thus generating electric energy.The torque arm produced by our company is mainly used as accessories for wind power generation equipment. Raw materials are purchased from round steel with recognized quality at home and abroad.
Contact Now
The torque arm we produce is mainly used in wind power generation industry, and it is an indispensable part of large fan blades.NAMETORQUE ARMMATERIAL334CrNiMo6HAEDNESS284-345INNER DIAMATER21OUTSIDE DIAMETER373Our Baohua Company was founded in 1969, and it has gone through three generations from state-owned to individual operation, covering an area of 140,000 ㎡, with 260 employees, 46 engineering technicians and more than 100 finishing operation equipment.The company's forging equipment mainly includes: five tons and three tons of free forging hammers, 2500 tons, 1000 tons and 600 tons of
Contact Now
Gear is a commonly used mechanical transmission element, which is used to transmit torque and rotary motion. It consists of one or more tooth tips, usually in the shape of a disk or a cylinder. The main function of gear is to realize the transmission of speed and torque, and at the same time, it can also change the steering and transmission direction.NAMEGEARMATERIAL18CrNiM07-6HARDNESS140-240INNER DIAMETER121OUTSIDE DIAMETER299.48Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡.
Contact Now
The planet carrier is one of the main components of planetary gear transmission, and the planetary axle or bearing is mounted on the planet carrier. When the planetary gear is the basic component, it is the part of the mechanism that bears the greatest external torque.
Contact Now
Gear is a commonly used mechanical transmission element, which is used to transmit torque and rotary motion. It is composed of one or more tooth top parts, with tooth grooves or teeth marks, and the transmission of force and motion between gears is realized by meshing. Attached product information:MATERIAL18CrNiM07-6HARDNESS140-240INNER DIAMETER210OUTSIDE DIAMETER610Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
Contact Now
The internal gear ring is a kind of ring-shaped part with internal tooth structure, which is usually used in reducers and hydraulic machinery in mechanical transmission systems. The input speed and torque can be reduced and increased at the output end through the gear transmission of the internal gear ring.Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing.
Contact Now
The middle shaft is a cylindrical object that passes through the middle of a bearing, wheel or gear, but a few of them are square. The middle shaft is a mechanical part that supports the rotating part and rotates with it to transmit motion, torque or bending moment. Generally, it is a metal round bar, and each section can have a different diameter. In the machine, the rotating parts are mounted on the shaft.The intermediate shaft forgings produced by our company are mainly used in equipment accessories of construction machinery industry, petroleum industry and wind power generation industry.
Contact Now
Baohua organization turned into hooked up in 1969, from the initial hard machining to further finishing production. from three sets of processing equipment to extra than 80 sets of processing gadget and inspection system, they all are primarily based on the manufacturing concept of honesty and patron-oriented.The materials we're producing cylinder heads are all produced by using normal steel producers, and the great of the materials may be guaranteed.
Contact Now
The cylinder head produced by our Baohua Company can be made of different materials according to customer requirements. Materials such as 45 #, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc. In addition, Baohua Company has independently developed the double cavity forging process, which can greatly improve the forging efficiency and reduce the blanking weight, and ultimately achieve the goal of cost saving. Forging is carried out on different forging equipment units according to different weights. The weight of forged products can reach 6kg-500kg.
Contact Now
The cylinder heads produced by our company are mainly used in construction machinery industry and wind power industry. The raw materials are domestic and international quality recognized round steel. According to the customer's requirements for products, we can carry out integrated forging with corresponding model die hammers, thus improving production efficiency and saving time.
Contact Now
The cylinder head products produced by our Baohua Company are mainly used in the construction machinery industry, with more equipment. The available materials are 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and many other materials.
Contact Now
After heating and repeated forging, it can also be modulated heat treatment and finishing according to customer requirements, so after repeated forging, the forging ratio is high, the durability is good, and it is suitable for key accessories of equipment.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-5000kg, Forging needs to be completed through heating, pre-forging, forming and other processes.Stainless steel forgings refer to the articles in which stainless steel materials are pressed to shape the required shape or suitable compression force through plastic deformation.This force is typically achieved by using a hammer or pressure.
Contact Now
Crankshaft is one of the main parts in machinery. Usually, it is a steel spherical rod around which wheels and other rotating parts rotate or follow. As a huge category, shafts are subdivided into intermediate shafts, crankshafts, driving shafts and so on. After the crankshaft is repeatedly pre-forged and die-forged by heating, the forging has high forging ratio, good durability and its quality is recognized by international certificates such as API API ,ISO.For details, please consult and communicate online or by email.
Contact Now
BAOHUA produces solid gear, ring gear shapes for single, double and different close to internet shapes for completing into numerous unique shapes.OUR FORGED GEAR SHAPES & ALLOYSHelical GearsBevel GearsHypoid GearsWorm GearsSpiroid GearsTorsoing GearsThese forged gear shapes may be crafted from ferrous and non-ferrous metals which include carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum and device steel.Forging gear and ring gear blank processBAOHUA uses a seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower
Contact Now
These hollow shaft may be crafted from ferrous and non-ferrous metals which include carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum and device steelBAOHUA produces solid gear, ring gear shapes for single, double and different close to internet shapes for completing into numerous unique shapes.OUR FORGED GEAR SHAPES & ALLOYSHelical GearsBevel GearsHypoid GearsWorm GearsSpiroid GearsTorsoing GearsBAOHUA uses a seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower volume requirements and near-finished shapes t
Contact Now
According to consumer requirements, we are able to make scrapers of numerous substances along with 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc. According to exclusive weights, we are able to forge on different forging system units. Our organization independently designs and manufactures molds , will maximize the financial savings of product substances and decrease forging weight, with the intention to attain price financial savings for customers.
Contact Now
Hangers produced by our company are mainly used in petroleum industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.
Contact Now
As a mechanical part that stops or slows down the moving parts in the machine, the brake shell can be produced according to the materials required by customers in the production process. At present, our Baohua Company uses 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc., which are widely used. The processing of the brake shell needs to be completed by heating, pre-forging, forming, trimming and other processes. According to different weights, the forged products can be forged on different forging equipment units, and the weight of forged products can reach 6kg-500kg.
Contact Now
As a mechanical part that stops or slows down the moving parts in the machine, the brake shell can be produced according to the materials required by customers in the production process. At present, our Baohua Company uses 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc., which are widely used. The processing of the brake shell needs to be completed by heating, pre-forging, forming, trimming and other processes. According to different weights, the forged products can be forged on different forging equipment units, and the weight of forged products can reach 6kg-500kg.
Contact Now
Our company is able to design the die according to the drawing according to the customer's requirements and achieve precision die forging, so that the utilization rate of rough processing hammer handle materials can reach more than 90%, which greatly saves costs. Our company can deliver according to the needs of customers with different delivery status.
Contact Now
