Hydraulic Cylinder-manufacture,factory,supplier from China

The working medium used by the hydraulic press not only transfers the pressure, but also ensures that the working parts of the machine work sensitively, reliably, with long service life and less leakage. The basic requirements for working medium of hydraulic press are: ① proper fluidity and low compressibility to improve transmission efficiency; ② Able to prevent corrosion; ③ Good lubrication performance; ④ Easy to seal; ⑤ Stable performance, no deterioration after long-term operation.

Cylinder head on construction machinery refers to the head of hydraulic cylinder, also known as hydraulic cylinder head. It is the key component of the hydraulic cylinder, which is used to transmit and control the movement of the hydraulic cylinder. Hydraulic cylinder heads are usually made of high-strength materials to withstand high pressure and heavy load working environment.

The rod eye is usually a circular hole, and the rod eye on the hydraulic machinery refers to a connection point or hole on the hydraulic cylinder, which is used to connect other mechanical parts or transmit power. The rod eye of the hydraulic cylinder is usually located on the piston rod of the cylinder body, and can provide stable support and connection point.NAMEROD EYEMATERIALQ345BMHARDNESS140-180INNER DIAMETER85.03OUTSIDE DIAMETER155.2Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡.

Cylinder head on construction machinery usually refers to a part of hydraulic cylinder, which is used to convert hydraulic energy into mechanical energy and realize the movement of machinery. Hydraulic cylinder head usually consists of cylinder body, piston and sealing assembly.

Cylinder head on construction machinery refers to the head of hydraulic cylinder, also known as hydraulic cylinder head. It is the key component of the hydraulic cylinder, which is used to transmit and control the movement of the hydraulic cylinder. Hydraulic cylinder heads are usually made of high-strength materials to withstand high pressure and heavy load working environment.

The support ring, also called the guide ring, is a part used on the piston or piston rod of a hydraulic cylinder or cylinder to support the movement of the piston or piston rod. It can prevent the piston or piston rod from directly contacting and rubbing with the cylinder body during the movement, thus protecting the cylinder body from being damaged.The support ring produced by our Baohua company is mainly used in equipment accessories in the petroleum industry. Forging the size of the support ring according to the requirements of customers for using round steel in product materials.

Baohua company was established in 1969, from the initial rough machining to further finishing production. From three sets of processing equipment to more than 80 sets of processing equipment and inspection equipment, all of them are based on the production concept of honesty and customer-oriented.The materials we are producing cylinder heads are all produced by regular steel manufacturers, and the quality of the materials can be guaranteed.

The cylinder heads produced through our enterprise are mainly utilized in construction equipment industry and wind energy technology industry. uncooked substances are bought from round metal with diagnosed nice at domestic and overseas. we are able to forge the corresponding version of dies and hammers in keeping with customers' necessities, thus enhancing production efficiency and saving time.

The cylinder heads produced by our company are mainly used in construction machinery industry and wind power generation industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.

The cylinder head in engineering usually refers to the cylinder head of the engine. Engine is the core power device of all kinds of construction machinery, and cylinder head is an important part of engine.Hydraulic cylinder is a common executive component in construction machinery, which is used to produce linear motion or drive other equipment.

Baohua organization turned into hooked up in 1969, from the initial hard machining to further finishing production. from three sets of processing equipment to extra than 80 sets of processing gadget and inspection system, they all are primarily based on the manufacturing concept of honesty and patron-oriented.The materials we're producing cylinder heads are all produced by using normal steel producers, and the great of the materials may be guaranteed.

The cylinder heads produced by our company are mainly used in construction machinery industry and wind power industry. The raw materials are domestic and international quality recognized round steel. According to the customer's requirements for products, we can carry out integrated forging with corresponding model die hammers, thus improving production efficiency and saving time.

The cylinder head produced by our Baohua Company can be made of different materials according to customer requirements. Materials such as 45 #, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc. In addition, Baohua Company has independently developed the double cavity forging process, which can greatly improve the forging efficiency and reduce the blanking weight, and ultimately achieve the goal of cost saving. Forging is carried out on different forging equipment units according to different weights. The weight of forged products can reach 6kg-500kg.

The cylinder heads produced by our company are mainly used in construction machinery industry and wind power generation industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.

Cylinder head, also known as cylinder head, is mainly used in construction machinery industry and wind power generation industry. Our company produces a variety of cylinder head products in these two industries, such as this product is processed on the basis of rough machining.

The cylinder heads produced by our company are mainly used in construction machinery industry and wind power industry. The raw materials are domestic and international quality recognized round steel. According to the customer's requirements for products, we can carry out integrated forging with corresponding model die hammers, thus improving production efficiency and saving time.

For the production of cylinder head products, our company can forge and produce cylinder head products by using many kinds of materials, such as 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and so on, according to customer requirements. In addition, our company has independent research and development of double-die cavity forging process, which can greatly improve the forging efficiency and reduce the weight of blanking, and ultimately achieve the purpose of cost saving. According to the weight, forging is carried out on different forging equipment units.

When we are producing cylinder head products, Baohua Company will produce products according to different materials according to the requirements specified by customers. For example: 45 #, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc.In addition, our company conducts forging on different forging equipment units according to different weights. The weight of forged products can reach 6kg - 500kg. Forging needs to be completed through heating, pre forging, forming, trimming and other processes.

Cylinder head, also known as cylinder head, is mainly used in construction machinery industry and wind power generation industry. Our company produces a variety of oil cylinder head products in these two industries. For example, this product is primarily processed and can be produced by secondary processing.

The cylinder head produced by our Baohua Company can be made of different materials according to customer requirements. Materials such as 45 #, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc. In addition, Baohua Company has independently developed the double cavity forging process, which can greatly improve the forging efficiency and reduce the blanking weight, and ultimately achieve the goal of cost saving. Forging is carried out on different forging equipment units according to different weights. The weight of forged products can reach 6kg-500kg.

When we are generating cylinder head merchandise, baohua organisation will produce products in step with special materials in step with the requirements distinctive by means of customers. for instance: forty five #, 40cr, 30crmo, 35crmo, 42crmo, 18crnimo7-6, etc.In addition, our company conducts forging on one-of-a-kind forging equipment devices in keeping with exclusive weights. the burden of cast merchandise can reach 6kg - 500kg. forging needs to be finished via heating, pre forging, forming, trimming and different approaches.

The cylinder head products produced by our Baohua Company are mainly used in the construction machinery industry, with more equipment. The available materials are 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and many other materials.

According to patron requirements, baohua cylinder head may be made from forty five#, 40cr, 30crmo, 35crmo, 42crmo, 18crnimo7-6 and other materials. our agency independently develops the forging procedure of twin-die hollow space, which can significantly enhance the forging performance and reduce the weight of blanking, and in the end acquire the purpose of value saving. consistent with the load, forging is completed on unique forging system devices. the burden of solid products can reach 6kg-500kg. the forging process wishes to be finished by using heating, pre-forging, forming and trimming.

The production of oil cylinder products is based on the drawings provided by the customer, independently designing the mold, and adopting the integrated forging forming of double mold cavities. While ensuring the accuracy, it greatly saves materials and improves the stability of the products. In addition, our Baohua company has the ability of finishing, which can cover multiple integrated processes such as forging, machining, heat treatment, finishing, and finally can achieve the delivery of finished products. The cylinder head is a box shaped part with complex structure.