A device used to plug a specific well layer or reservoir in a casing, which can prevent the flow of fluid by expansion or differential pressure sealing.Material45#Hardness241-287Inner Diameter50.8Outside Diameter223.5Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
Contact Now
Flanges used in oil fields require strong sealing and high quality, and our Baohua company has been processing flanges in oil fields for many years and indirectly exported them to foreign countries-Germany and Russia. Because the domestic industry is not ideal, we want to import and export directly with foreign customers, avoiding third-party fees, so as to ensure high quality products and low prices. The following table is the information of this product.
Contact Now
This product is mainly used in oil field pipeline fittings, after a series of processing technologies such as casting blank, rough cutting, fine turning, boring, drilling, heat treatment and quality inspection. We have API 20B ,API Q1 certificates, and the quality has passed ISO9001, so the product quality and after-sales can be guaranteed.
Contact Now
This product is in particular utilized in oil discipline pipeline fittings, after a sequence of processing technology along with casting clean, difficult cutting, high-quality turning, dull, drilling, warmness remedy and nice inspection. we've api 20b ,api q1 certificates, and the first-rate has exceeded iso9001, so the product excellent and after-sales can be guaranteed.
Contact Now
Connectors refer to components used to connect electrical components or electronic devices, which are an indispensable part of electronic circuits. The connector can be connected with power supply, signal and control lines to make the circuit work normally and reliably.The features of the connector are as follows:1. High reliability: the connector is made of finished materials, which has good mechanical properties and corrosion resistance and can work stably for a long time.2.
Contact Now
The production of connector is mainly used in the accessories of oilfield wellhead equipment. We can design dies according to the drawings provided by you and carry out mass die forging, thus reducing the cost.The connectors produced by our company are mainly used in the petroleum industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.
Contact Now
In petroleum industry, piston head is mainly used in oil well production and oil and gas storage equipment.In the oil well production, the piston head is applied to the oil well sucker rod system. Oil well sucker rod system includes sucker rod, pump and oil well drum. The piston head is installed at the bottom of the pump, which changes the volume of the pump cavity by moving up and down, thus pumping the underground crude oil to the ground.
Contact Now
The production of union products is based on the drawings provided by the customer, independently designing the mold, and adopting the integrated forging of double mold cavities. While ensuring the accuracy, it greatly saves materials and improves the stability of the products. In addition, our Baohua company has the ability of finishing, which can cover multiple integrated processes such as forging, machining, heat treatment, finishing, and finally can achieve the delivery of finished products. The cylinder head is a box shaped part with complex structure.
Contact Now
The manufacturing of connector is particularly used within the accessories of oilfield wellhead system. we are able to layout dies in keeping with the drawings furnished by means of you and carry out mass die forging, as a result decreasing the price.The connectors produced by using our employer are specifically used within the petroleum industry. uncooked substances are purchased from round steel with recognized excellent at home and abroad.
Contact Now
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. Details are as follows:NAMEFlange In Oil FieldMATERIAL4130-75KHARDNESS207-237INNER DIAMETER387.35OUTSIDE DIAMETER509.52Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
Contact Now
Connectors refer to components used to connect electrical components or electronic devices, which are an indispensable part of electronic circuits.Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
Contact Now
Casing head is generally cast from steel and usually includes two main parts: outer jacket and inner lining. The outer jacket is the outermost layer inserted into the next casing, and the inner liner is the inner layer inserted into the next casing. The casing head also includes some other connecting parts, such as threaded rings and sealing rings.The connectors produced by our company are mainly used in the petroleum industry. Raw materials are purchased from round steel with recognized quality at home and abroad.
Contact Now
The casing on the oil field is usually a drilling casing or an oil well casing. Drilling casing is installed during drilling to keep the borehole stable and avoid formation collapse. Oil well casing is installed after the wellhead is developed, which is mainly used to support the wellbore and prevent oil and gas loss or contact with the wellbore. Oil well casing is usually made of carbon steel with different wall thickness and diameter to withstand high pressure and high temperature environment.
Contact Now
For the production of plugs, they are mainly used in accessories of petroleum and mechanical equipment.Its function is to prevent the flow of fluid through expansion or differential pressure sealing.Material45#Hardness241-287Inner Diameter220Outside Diameter611Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
Contact Now
The working medium used by the hydraulic press not only transfers the pressure, but also ensures that the working parts of the machine work sensitively, reliably, with long service life and less leakage. The basic requirements for working medium of hydraulic press are: ① proper fluidity and low compressibility to improve transmission efficiency; ② Able to prevent corrosion; ③ Good lubrication performance; ④ Easy to seal; ⑤ Stable performance, no deterioration after long-term operation.
Contact Now
Connector is a kind of mechanical assembly used to connect different components or parts, which is widely used in industry, manufacturing and machining. The connector can effectively connect different types of materials and parts, such as metal, plastic, rubber, pipes, cables, etc. Common connection forms include threaded connection, bayonet connection, welded connection, plug connection, etc.Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing.
Contact Now
Our Baohua Company is a state-owned enterprise, which has a history of more than 60 years. From the initial forging of iron parts to the present roughing, heat treatment and finishing of forgings. Instruments and equipment also follow the current product production requirements. At present, there are more than 80 sets of processing equipment, including ZEISS three-coordinate, Japanese small plate contour meter, gear tester, Omega tool counter and other inspection and testing equipment.
Contact Now
The rod eye is usually a circular hole, and the rod eye on the hydraulic machinery refers to a connection point or hole on the hydraulic cylinder, which is used to connect other mechanical parts or transmit power. The rod eye of the hydraulic cylinder is usually located on the piston rod of the cylinder body, and can provide stable support and connection point.NAMEROD EYEMATERIALQ345BMHARDNESS140-180INNER DIAMETER85.03OUTSIDE DIAMETER155.2Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡.
Contact Now
After heating and repeated forging, it may additionally be modulated and warmth dealt with and completed in keeping with purchaser requirements. After repeated forging, the forging ratio has excessive forging ratio and top durability, that's appropriate for key components of equipment.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 60kg-7000kg, Forging needs to be completed through heating, pre-forging, forming and other processes.The die movement and degree of freedom of the forging equipment are inconsistent. According to the deformation limitation characteristics of the lower dead center, the forging equipment can be divided into the following four forms:1.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-500kg, Forging needs to be completed through heating, pre-forging, forming, and other processes.The die movement and degree of freedom of the forging equipment are inconsistent. According to the deformation limitation characteristics of the lower dead center, the forging equipment can be divided into the following four forms:1.
Contact Now
Gear is a common mechanical transmission device, which consists of one or more gears. The finished gear is mainly made of 18CrNiMo7-6. After turning, milling, drilling, planing, rolling, shaving, grinding and heat treatment. Further finish machining from primary machining. Details of this product are as follows:Product NameGear FinishedMaterial18CrNiMo7-6HARDNESS140-240INNER DIAMETER210OUTSIDE DIAMETER611Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡.
Contact Now
According to the model of this product, the die and forging are integrated, and mass production is executed. thereby decreasing prices and excessive performance. and our business enterprise can use various varieties of substances inclusive of: 4140, 35CrMo, 42CrMo, forty five#, 4130 and so forth. after repeated pre-forging through heating, after die forging, the forging ratio is high and the sturdiness is good, that is suitable for the important thing components of the gadget. 1.
Contact Now
Gear is a commonly used mechanical transmission element, which is used to transmit torque and rotary motion. It is composed of one or more tooth top parts, with tooth grooves or teeth marks, and the transmission of force and motion between gears is realized by meshing. Attached product information:MATERIAL18CrNiM07-6HARDNESS140-240INNER DIAMETER210OUTSIDE DIAMETER610Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
Contact Now
