Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
For the production of plugs, they are mainly used in accessories of petroleum and mechanical equipment.Its function is to prevent the flow of fluid through expansion or differential pressure sealing.Material45#Hardness241-287Inner Diameter220Outside Diameter611Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-5000kg, Forging needs to be completed through heating, pre-forging, forming and other processes.Stainless steel forgings refer to the articles in which stainless steel materials are pressed to shape the required shape or suitable compression force through plastic deformation.This force is typically achieved by using a hammer or pressure.
Contact Now
Slip seat, also known as sliding bearing sleeve, is a mechanical component used to support bearings and reduce friction in mechanical equipment.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
The driving shaft forgings produced by our company are mainly used in construction machinery industry, petroleum industry and wind power industry. The raw materials are hot rolled round steel or ingot recognized at home and abroad. According to customer's requirements, we can carry out hot forging and forming, and meet the requirements of ultrasonic testing (UT). Forging can improve product performance and save cost.
Contact Now
Shaft: one of the main parts in machinery. Generally, it is a metal round rod around which wheels and other rotating parts rotate or follow it.As a big category, shafts are subdivided into intermediate shafts, crankshafts, driving shafts, etc.The intermediate shaft forgings produced by our company are mainly used in construction machinery industry, petroleum industry and wind power industry. The raw materials are hot rolled round steel or ingot recognized at home and abroad.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. There are holes in the flanges, and bolts make the two flanges closely connected. All connecting parts that are bolted around two planes and closed at the same time are generally called "flanges", such as the connection of ventilation pipes. Such parts can be called "flange parts".
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Connectors refer to components used to connect electrical components or electronic devices, which are an indispensable part of electronic circuits.Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
Contact Now
The middle shaft is a cylindrical object that passes through the middle of a bearing, wheel or gear, but a few of them are square. The middle shaft is a mechanical part that supports the rotating part and rotates with it to transmit motion, torque or bending moment. Generally, it is a metal round bar, and each section can have a different diameter. In the machine, the rotating parts are mounted on the shaft.The intermediate shaft forgings produced by our company are mainly used in equipment accessories of construction machinery industry, petroleum industry and wind power generation industry.
Contact Now
The cylinder heads produced through our enterprise are mainly utilized in construction equipment industry and wind energy technology industry. uncooked substances are bought from round metal with diagnosed nice at domestic and overseas. we are able to forge the corresponding version of dies and hammers in keeping with customers' necessities, thus enhancing production efficiency and saving time.
Contact Now
Our BaoHua business enterprise is a nation-owned agency, which has a history of more than 60 years. from the preliminary forging of iron parts to the existing roughing, warmth treatment and finishing of forgings. devices and device additionally observe the contemporary product manufacturing requirements. at present, there are more than 80 units of processing equipment, together with zeiss 3-coordinate, eastern small plate contour meter, equipment tester, omega device counter and other inspection and trying out device. the company has handed iso9001, api, sq.
Contact Now
This product may be time and again solid after heating, and also can be modulated and heat handled and finished according to purchaser necessities. after repeated forging, the forging ratio is excessive and the durability is good. it's miles suitable for key elements of gadget. for casing heads, our employer can forge 10kg-5000kg forgings, and can forge an expansion of materials along with 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410ss.
Contact Now
A device used to plug a specific well layer or reservoir in a casing, which can prevent the flow of fluid by expansion or differential pressure sealing.Material45#Hardness241-287Inner Diameter50.8Outside Diameter223.5Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
Contact Now
Our Baohua Company is a state-owned to private enterprise. The family business has a history of more than 60 years, from the initial forging iron pieces to the current rough processing, heat treatment and finishing of forgings. Instruments and equipment also closely follow the requirements of modern product production. At present, there are more than 80 processing equipment, as well as ZEISS CMM, Japanese small board profiler, gear detector, Ω MEGA tool setting instrument and other inspection and detection equipment.
Contact Now
Our company employs a new seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower volume requirements and near-finish shapes to save on final tooling costs. All of our forgings can go through hot die forging, rough machining, heat treatment and other processes, and the forgings can be finished to reach the final assembly condition.
Contact Now
The cylinder head in engineering usually refers to the cylinder head of the engine. Engine is the core power device of all kinds of construction machinery, and cylinder head is an important part of engine.Hydraulic cylinder is a common executive component in construction machinery, which is used to produce linear motion or drive other equipment.
Contact Now
Flange has the blessings of high electricity, excellent sealing, handy upkeep, robust adaptability and reusability, which makes it an essential and essential factor in pipeline system. the subsequent is the product records. MATERIAL4130-75KHARDNESS207-237INNER DIAMETER57.76OUTSIDE DIAMETER304.65Our baohua business enterprise turned into based in 1969. after three generations' tough paintings, it now covers an area of fifty,000 ㎡ and has a building vicinity of 25,000 ㎡. there are 260 employees and forty six engineering technicians. the once a year output of forgings is 30,000 lots.
Contact Now
