Casing Hanger-manufacture,factory,supplier from China

Casing hanger is a device for supporting and fixing casing, which is usually used in drilling operations of oil wells and natural gas wells. It is located at the interface between wellhead and downhole casing, and plays the role of installing and maintaining casing.NAMECASING HANGERMATERIAL4140-130KHARDNESS301-341INNER DIAMETER146.04OUTSIDE DIAMETER275.55Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing.

Casing hanger can be divided into slip type and mandrel type. Casing hanger in oil plays an important role in fixing, supporting, sharing pressure and preventing wellbore instability, which helps to ensure the safety, stability and integrity of oil wells.MATERIAL4140-130KHARDNESS301-341INNER DIAMETER146.04OUTSIDE DIAMETER275.55Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.

We can make 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials according to customer requirements. According to different weights, we can forge on different forging equipment units. The weight of forged products can reach 6kg-500kg. It needs to be completed by heating, pre-forging, forming, trimming and other processes. The casing head is usually made of 35 or 42 Cr Mo alloy structural steel. There is also a casing hanger in the casing head, which is used to hang the casing string of corresponding specifications and seal the annulus. BOP stack shall be installed on it.

We can make 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials in line with purchaser necessities. In line with one-of-a-kind weights, we can forge on exceptional forging device devices. the weight of solid merchandise can attain 6kg-500kg. it desires to be finished by using heating, pre-forging, forming, trimming and different approaches. The casing head is usually made of 35 or 42 Cr Mo alloy structural steel. A casing hanger is also arranged in the casing head to suspend casing strings of corresponding specifications and seal the annulus.

This product may be time and again solid after heating, and also can be modulated and heat handled and finished according to purchaser necessities. after repeated forging, the forging ratio is excessive and the durability is good. it's miles suitable for key elements of gadget. for casing heads, our employer can forge 10kg-5000kg forgings, and can forge an expansion of materials along with 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410ss.

Our enterprise can independently layout and method forging dies consistent with the drawings, and could try our first-rate to store forging materials. the burden of the solid product can attain 60kg-5000kg, and the forging needs to be finished thru heating, pre-forging, forming and other processes. numerous materials inclusive of 42CrMo, 4140, 4130, 40cr, 20CrMnMo, 18CrNiMo7-6, 410ss can be solid. our employer has APIcertificates and SQ1 certificates and has many years of revel in in petroleum product processing.The casing head is usually made of 35 or 42 Cr Mo alloy structural steel.

Our company has many years of experience in petroleum product processing, and has API certificate and SQ1 certificate. For casing heads, our company can forge 10kg-5000kg forgings, and can forge a variety of materials including 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410SS. The product is formed by heating and repeated forging, so that the forging ratio after forging is high, the durability is good, and it is suitable for key accessories of equipment.The casing head is generally made of 35 or 42 chrome molybdenum high-quality alloy structural steel.

This product can be repeatedly forged after heating, and can also be modulated and heat treated and finished according to customer requirements. After repeated forging, the forging ratio is high and the durability is good. It is suitable for key parts of equipment. For casing heads, our company can forge 10kg-5000kg forgings, and can forge a variety of materials including 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410SS.

Our company has ISO9001, API, SQ1 and other certificates, more than 80 sets of processing machinery and equipment, as well as ZEISS CMM, Japanese small plate profiler, gear detector, Ω MEGA tool setting instrument and other inspection and testing equipment.For the production of tubing hanger products, our company can independently design the mold according to the drawings provided by the customer, and use different materials according to the product specifications, through a series of processes such as rough machining, heat treatment, and finishing for mass production.

Hangers produced by our company are mainly used in petroleum industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.

Our company can independently design and process forging dies according to the drawings, and will try our best to save forging materials. The weight of the forged product can reach 60kg-5000kg, and the forging needs to be completed through heating, pre-forging, forming and other processes. Various materials including 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410SS can be forged. Our company has API certificate and SQ1 certificate and has many years of experience in petroleum product processing.The casing head is usually made of 35 or 42 Cr Mo alloy structural steel.

The casing on the oil field is usually a drilling casing or an oil well casing. Drilling casing is installed during drilling to keep the borehole stable and avoid formation collapse. Oil well casing is installed after the wellhead is developed, which is mainly used to support the wellbore and prevent oil and gas loss or contact with the wellbore. Oil well casing is usually made of carbon steel with different wall thickness and diameter to withstand high pressure and high temperature environment.

Casing head is generally cast from steel and usually includes two main parts: outer jacket and inner lining. The outer jacket is the outermost layer inserted into the next casing, and the inner liner is the inner layer inserted into the next casing. The casing head also includes some other connecting parts, such as threaded rings and sealing rings.The connectors produced by our company are mainly used in the petroleum industry. Raw materials are purchased from round steel with recognized quality at home and abroad.

A device used to plug a specific well layer or reservoir in a casing, which can prevent the flow of fluid by expansion or differential pressure sealing.Material45#Hardness241-287Inner Diameter50.8Outside Diameter223.5Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.

Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing. And has ISO 9001, API 20b and API Q1 certificates.

The production of flange should go through a series of processing, such as casting blank, rough cutting, fine turning, boring, drilling, heat treatment, quality inspection, etc. We process the casing head in different stages according to the customer's requirements. And there are certificates such as API recognized by american petroleum institute, and the quality can be guaranteed. The flanges we process and produce are mainly used in petroleum and construction machinery and equipment industries.

The materials we use in the production of torque arm are generally made of 45 or 40Cr steel. According to the drawings provided by customers, through a series of processes such as forging, tempering, lathe machining, hobbing, drilling, quenching, flaw detection, high-temperature tempering, testing and packaging, the torque arm products that meet the needs of customers are created.

The booster ring, also known as the booster ring, is an annular seal used to seal and protect equipment in high pressure environment. It is usually made of highly elastic materials, such as fluororubber or silicone rubber, to ensure stable sealing performance.

The high neck flange produced by using our baohua company is specially used inside the accessories of gadget in the petroleum industry. forging the dimensions of excessive neck flange consistent with the necessities of clients for the usage of spherical steel in product materials.

The high neck flange produced by our company is mainly used in petroleum machinery industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.

In the production of high neck flange, the flange is formed by hot pressing or cold pressing, including the processing of screw holes and the opening of the flange.During the inspection, the welded flange is inspected, such as pressure test, chemical composition analysis, magnetic particle inspection, etc., to ensure its quality meets the requirements.Finally, in the surface treatment, the flange can be treated with zinc plating, spraying and electroplating to enhance its corrosion resistance and aesthetics.Product Details:Material4130-75kHardness207-237Inner Diameter52.7Outside Diameter311Our

Flange has the advantages of high strength, good sealing, convenient maintenance, strong adaptability and reusability, which makes it an indispensable and important component in pipeline system. The following is the product information.  MATERIAL4140-125KHARDNESS293-327INNER DIAMETER201.13OUTSIDE DIAMETER342.33Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.

Bearing seat is a mechanical part used to fix bearings. Generally, it includes two parts: base and support. The base is composed of a platform and a flange, and the flange usually has fixing screw holes for fixing to the frame of machinery and equipment. Bearings are the mounting parts of bearings, usually made of cast iron or sheet metal, with brackets for mounting bearings and fixing screw holes. Bearing seat is usually made by casting or machining, which has high strength and durability and is widely used in various mechanical equipment.Our Baohua Company was founded in 1969.

The  completed threaded flange  we produce may be processed by using hot-die forging, difficult operating, warmth remedy and different approaches, thus growing the forging ratio and performance stability. Completed threaded flange can be similarly processed to acquire very last meeting conditions.The corporation uses a continuing rolling ring technique, which ends up in more solid product performance and greatly decreased weight and value financial savings.