Bearing seat is a mechanical part used to put in bearings, which is normally fabricated from solid metallic, gray cast iron, solid aluminum alloy, forged copper and different substances. the bearing seat supports and locates the axis of rotation by means of solving and helping the bearing.
Contact Now
Shaft: one of the main parts in machinery. Generally, it is a metal round rod around which wheels and other rotating parts rotate or follow it.As a big category, shafts are subdivided into intermediate shafts, crankshafts, driving shafts, etc.The intermediate shaft forgings produced by our company are mainly used in construction machinery industry, petroleum industry and wind power industry. The raw materials are hot rolled round steel or ingot recognized at home and abroad.
Contact Now
Selection of positioning datumThe machining sequence of the main surface of the gear shaft largely depends on the selection of the positioning datum. The structural characteristics of shaft parts and the position accuracy requirements of the main surface of the spindle determine that taking the axis as the positioning datum is the most ideal. This not only ensures the unity of the datum, but also makes the positioning datum coincide with the design datum. Generally, the outer circle is the coarse datum, and the sharp holes at both ends of the shaft are the fine datum.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-500kg, Forging needs to be completed through heating, pre-forging, forming, trimming and other processes.Flange is also called flange plate or flange. Flanges are the parts that connect pipes to each other and are connected to pipe ends. There are holes on the flange, and the bolts make the two flanges tightly connected.
Contact Now
After heating and repeated forging, it may additionally be modulated and warmth dealt with and completed in keeping with purchaser requirements. After repeated forging, the forging ratio has excessive forging ratio and top durability, that's appropriate for key components of equipment.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 60kg-7000kg, Forging needs to be completed through heating, pre-forging, forming and other processes.The die movement and degree of freedom of the forging equipment are inconsistent. According to the deformation limitation characteristics of the lower dead center, the forging equipment can be divided into the following four forms:1.
Contact Now
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-500kg, Forging needs to be completed through heating, pre-forging, forming, and other processes.The die movement and degree of freedom of the forging equipment are inconsistent. According to the deformation limitation characteristics of the lower dead center, the forging equipment can be divided into the following four forms:1.
Contact Now
The driving shaft forgings produced by our company are mainly used in construction machinery industry, petroleum industry and wind power industry. The raw materials are hot rolled round steel or ingot recognized at home and abroad. According to customer's requirements, we can carry out hot forging and forming, and meet the requirements of ultrasonic testing (UT). Forging can improve product performance and save cost.
Contact Now
According to the model of this product, the die and forging are integrated, and mass production is executed. thereby decreasing prices and excessive performance. and our business enterprise can use various varieties of substances inclusive of: 4140, 35CrMo, 42CrMo, forty five#, 4130 and so forth. after repeated pre-forging through heating, after die forging, the forging ratio is high and the sturdiness is good, that is suitable for the important thing components of the gadget. 1.
Contact Now
These hollow shaft may be crafted from ferrous and non-ferrous metals which include carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum and device steelBAOHUA produces solid gear, ring gear shapes for single, double and different close to internet shapes for completing into numerous unique shapes.OUR FORGED GEAR SHAPES & ALLOYSHelical GearsBevel GearsHypoid GearsWorm GearsSpiroid GearsTorsoing GearsBAOHUA uses a seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower volume requirements and near-finished shapes t
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Articulated joint refers to the connection point or joint between two objects or structures. Articulation joints can be made of various forms and materials, which are used to realize different types of connection functions, such as rotation, swing, fixation and so on.NAMEArticulated Joint ProductsMATERIAL42CrMoHARDNESS 235-280INNER DIAMETER210OUTSIDE DIAMETER287Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
Contact Now
The joint joints produced by our Baohua company are mainly used in the wind power industry and equipment accessories of construction machinery. Forging the size of the internal gear ring according to the requirements of customers for using round steel in product materials. Bulk purchasing can open molds for specialized supply and finishing production.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Our agency independently designs dies and forges in step with product specs. material kinds and weights may be made consistent with patron necessities. our business enterprise additionally has rough machining, warmness treatment and satisfactory machining, which may be brought consistent with the requirements of customers in exceptional shipping states.
Contact Now
Our Baohua company has mold design engineers who can provide drawings according to customersIndependently design and develop the mold, which makes the bearing seat forged into one, greatly saving materials, and improving the stability of the product. In addition, our company has the ability of finishing, which can cover multiple integrated processes such as forging, machining, heat treatment and finishing, and can finally achieve the delivery of finished products.
Contact Now
Our corporation makes use of the seamless rolling ring process, which makes the product more solid and can greatly reduce the weight of blanking and save fee.
Contact Now
When we are generating cylinder head merchandise, baohua organisation will produce products in step with special materials in step with the requirements distinctive by means of customers. for instance: forty five #, 40cr, 30crmo, 35crmo, 42crmo, 18crnimo7-6, etc.In addition, our company conducts forging on one-of-a-kind forging equipment devices in keeping with exclusive weights. the burden of cast merchandise can reach 6kg - 500kg. forging needs to be finished via heating, pre forging, forming, trimming and different approaches.
Contact Now
The production of flange should go through a series of processing, such as casting blank, rough cutting, fine turning, boring, drilling, heat treatment, quality inspection, etc. We process the casing head in different stages according to the customer's requirements. And there are certificates such as API recognized by american petroleum institute, and the quality can be guaranteed. The flanges we process and produce are mainly used in petroleum and construction machinery and equipment industries.
Contact Now
Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.
Contact Now
Baohua company was established in 1969, from the initial rough machining to further finishing production. From three sets of processing equipment to more than 80 sets of processing equipment and inspection equipment, all of them are based on the production concept of honesty and customer-oriented.In general, the materials used in the production of gear rings are made of 45 or 40Cr steel.
Contact Now
The gear ring produced by our Baohua company is mainly used in the equipment parts of construction machinery. Forging the size of the internal gear ring according to the requirements of customers for using round steel in product materials.
Contact Now
For the production of cylinder head merchandise, our business enterprise can forge and bring cylinder head products by way of the use of many kinds of materials, together with forty five#, 40cr, 30crmo, 35crmo, 42crmo, 18crnimo7-6 and so forth, in step with purchaser requirements. similarly, our company has unbiased research and improvement of double-die cavity forging process, that could substantially improve the forging performance and reduce the load of blanking, and in the end achieve the purpose of cost saving. in step with the load, forging is finished on unique forging device gadgets.
Contact Now
The cylinder head products produced by our Baohua Company are mainly used in the construction machinery industry, with more equipment. The available materials are 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and many other materials.
Contact Now
